From ZCWiki
Revision as of 15:20, 17 March 2010 by MoscowModder (talk | contribs) (Added an example)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
This article has been transferred from the PureZC Wiki, and may need to be updated.

Layers are used to make combos appear to be on top of each other.

The layers are as follows:

0: The Default Layer. Below Everything.

1: Below Everything but layer 0

(Sprite layer for Freeform Combos. Between 1 and 2.)

2: Below Everything but layers 0 and 1.

(Sprite layer for Link, ground enemies, and items, as well as pushable blocks. Above layers 1 and 2.)

3: Above Link and ground enemies, but below flying enemies.

4: Above Link, ground enemies, and layer 3, but also below flying enemies.

(Sprite layer for flying enemies. Above layers 3 and 4.)

5: Above everything but layer 6

6: The top layer.

To use layers in your quest, go to Screen->Layers or press F12. You can set the coordinates of the screens to use for each layer. The simplest way to use layers is make a new map for each layer of each map that you want to use layers with. Simply set your Map Count high enough to include each layer that you want to use, and then open your Layers dialogue box in any screen. Press the Auto button under the layer you want to set, and then enter the number of a blank map to use it as a layer. From then on, the layer selection boxes will be selectable for the layers you created, and each screen on the map will use the same screen on the chosen map for that layer.

Example: The overworld is on map 1. There are currently 4 maps in the game, but more can be added for dungeons. On any screen on map 1, the Layer dialogue box is opened and the auto function is used to set map 2 to layer 1, map 3 to layer 3, and map 4 to layer 5. On every screen in map 1, you can now edit layers 0, 1, 3, and 5. If you add more maps or manually set layers, you could also use layers 2, 4, and 6.

In the layers dialogue box (but not the layer selector in the main window), you can manually set layers for individual screens (without affecting the auto layer setup), and you can also make certain layers translucent for that screen.